Temperature-Dependent Ferroelectric Properties and Aging Behavior of Freeze-Cast Bismuth Ferrite-Barium Titanate Ceramics.

Lead-free BiFeO3-BaTiO3 (BF-BT) piezoceramics have sparked considerable interest in recent years due to their high piezoelectric performance and high Curie temperature. In this paper, we show how the addition of highly aligned porosity (between 40 and 60 vol %) improves the piezoelectric performance, sensing, and energy harvesting figures of merit in freeze-cast 0.70BiFeO3-0.30BaTiO3 piezoceramics compared to conventionally processed, nominally dense samples of the same composition. The dense and porous BF-BT ceramics had similar longitudinal piezoelectric coefficients (d33) immediately after poling, yet the dense samples were observed to age faster than those of porous ceramics. After 24 h, for example, the porous samples had significantly higher d33 values ranging from 112 to 124 pC/N, compared to 85 pC/N for the dense samples. Porous samples exhibited 3 and 5 times higher longitudinal piezoelectric voltage coefficient g33 and energy harvesting figure of merit d33g33 than dense samples due to the unexpected increase in d33 and decrease in relative permittivity with porosity. Spontaneous polarization (Ps) and remnant polarization (Pr) decrease as the porosity content increased from 37 to 59 vol %, as expected due to the lower volume of active material; however, normalized polarization values with respect to porosity level showed a slight increase in the porous materials relative to the dense BF-BT. Furthermore, the porous ceramics showed improved temperature-dependent strain-field response compared to the dense. As a result, these porous materials show excellent potential for use in high temperature sensing and harvesting applications.

A pig model of symptomatic spinal epidural hematoma.

PURPOSE: The purpose of this study was to establish an animal model capable of simulating the development and decompression process of symptomatic spinal epidural hematoma (SSEH). METHODS: A total of 16 male Bama miniature pigs were included in this study and randomly allocated into four groups: Group A (4 h 20 mmHg hematoma compression), Group B (4 h 24 mmHg hematoma compression), Group C (4 h 28 mmHg hematoma compression), and Group Sham (control). Real-time intra-wound hematoma compression values were obtained using the principle of connectors. Electrophysiological analyses, including the latency and amplitude of somatosensory evoked potentials (SSEP) and motor evoked potentials (MEP), along with behavioral observations (Tarlov score), were performed to assess this model. RESULTS: ANOVA tests demonstrated significant differences in the latency and relative amplitude of SSEP and MEP between Groups C and Sham after 4 h of hematoma compression and one month after surgery (P < 0.01). Behavioral assessments 8 h after surgery indicated that animals subjected to 28 mmHg hematoma compression suffered the most severe spinal cord injury. Pearson correlation coefficient test suggested a negative correlation between the epidural pressure and Tarlov score (r = -0.700, p < 0.001). With the progression of compression and the escalation of epidural pressure, the latency of SSEP and MEP gradually increased, while the relative amplitude gradually decreased. CONCLUSIONS: When the epidural pressure reaches approximately 24 mmHg, the spinal cord function occurs progressive dysfunction. Monitoring epidural pressure would be an effective approach to assist to identify the occurrence of postoperative SSEH.

Identification and Validation of Magnolol Biosynthesis Genes in Magnolia officinalis.

Bacterial infections pose a significant risk to human health. Magnolol, derived from Magnolia officinalis, exhibits potent antibacterial properties. Synthetic biology offers a promising approach to manufacture such natural compounds. However, the plant-based biosynthesis of magnolol remains obscure, and the lack of identification of critical genes hampers its synthetic production. In this study, we have proposed a one-step conversion of magnolol from chavicol using laccase. After leveraging 20 transcriptomes from diverse parts of M. officinalis, transcripts were assembled, enriching genome annotation. Upon integrating this dataset with current genomic information, we could identify 30 laccase enzymes. From two potential gene clusters associated with magnolol production, highly expressed genes were subjected to functional analysis. In vitro experiments confirmed MoLAC14 as a pivotal enzyme in magnolol synthesis. Improvements in the thermal stability of MoLAC14 were achieved through selective mutations, where E345P, G377P, H347F, E346C, and E346F notably enhanced stability. By conducting alanine scanning, the essential residues in MoLAC14 were identified, and the L532A mutation further boosted magnolol production to an unprecedented level of 148.83 mg/L. Our findings not only elucidated the key enzymes for chavicol to magnolol conversion, but also laid the groundwork for synthetic biology-driven magnolol production, thereby providing valuable insights into M. officinalis biology and comparative plant science.

[Clinical outcomes of 3D-printing stand-alone artificial vertebral body in anterior cervical surgeries].

OBJECTIVE: To explore the short-term outcomes of 3D-printing stand-alone artificial vertebral body (AVB) in the surgical procedure of anterior cervical corpectomy and fusion (ACCF). METHODS: Following the proposal of IDEAL (idea, development, exploration, assessment, and long-term follow-up) framework, we designed and conducted this single-armed, retrospective cohort study. The patients with cervical spondylotic myelopathy were recruited, and these patients exclusively received the surgical procedure of single-level ACCF in our single center. After the process of corpectomy, the size was tailored using different trials and the most suitable stand-alone AVB was then implanted. This AVB was manufactured by the fashion of 3D-printing. Two pairs of screws were inserted in an inclined way into the adjacent vertebral bodies, to stabilize the AVB. The participants were regularly followed-up after the operation. Their clinical data were thoroughly reviewed. We assessed the neurological status according to Japanese Orthopedic Association (JOA) scale. We determined the fusion based on imaging examination six months after the operation. The recorded clinical data were analyzed using specific software and they presented in suitable styles. Paired t test was employed in comparison analysis. RESULTS: In total, there were eleven patients being recruited eventually. The patients were all followed up over six months after the operation. The mean age of the cohort was (57.2±10.2) years. The mean operation time was (76.1±23.1) min and the median bleeding volume was 150 (100, 200) mL. The postoperative course was uneventful for all the cases. Dysphagia, emergent hematoma, and deterioration of neurological function did not occur. Mean JOA scores were 13.2±2.2 before the operation and 16.3±0.8 at the final follow-up, which were significantly different (P < 0.001). The mean recovery rate of neurological function was 85.9%. By comparing the imaging examinations postoperatively and six months after the operation, we found that the average subsidence length was (1.2±1.1) mm, and that there was only one cases (9.1%) of the severe subsidence (>3 mm). We observed significant improvement of cervical lordosis after the operation (P=0.013). All the cases obtained solid fusion. CONCLUSION: 3D-printing stand-alone AVB presented favorable short-term outcome in one-level ACCF in this study. The fusion rate of this zero-profile prosthesis was satisfactory and the complication rate was relatively low.

Bottom-up design of carbon allotropes with tunable properties.

Carbon materials have received great attention owing to their numerous allotropes and rich properties. Structure design and property tuning of carbon materials is one of the tremendous challenges in the field of materials science research. Here we carried out a bottom-up approach and identified a series of carbon allotropes with similar structures but distinct properties. The structures designed in this work had comparable energy stability to those previously predicted using the top-down global structure search method. Theoretical property calculations demonstrated that the three carbon structures with pure sp3 hybridization possessed semiconductive and superhard properties, while the carbon structure with sp2 + sp3 hybridization exhibited metallic features. Also, they differed significantly in the anisotropy of the mechanical properties. These carbon structures had some match to the unidentified phases in the detonation soot and could hopefully be synthesized by thermal "degassing" of high-pressure Na-C products. Our results propose a strategy to regulate properties through structural tuning, thus paving a way for the design and synthesis of materials with desirable properties.

Structural transition and migration of incoherent twin boundary in diamond.

Grain boundaries (GBs), with their diversity in both structure and structural transitions, play an essential role in tailoring the properties of polycrystalline materials1-5. As a unique GB subset, {112} incoherent twin boundaries (ITBs) are ubiquitous in nanotwinned, face-centred cubic materials6-9. Although multiple ITB configurations and transitions have been reported7,10, their transition mechanisms and impacts on mechanical properties remain largely unexplored, especially in regard to covalent materials. Here we report atomic observations of six ITB configurations and structural transitions in diamond at room temperature, showing a dislocation-mediated mechanism different from metallic systems11,12. The dominant ITBs are asymmetric and less mobile, contributing strongly to continuous hardening in nanotwinned diamond13. The potential driving forces of ITB activities are discussed. Our findings shed new light on GB behaviour in diamond and covalent materials, pointing to a new strategy for development of high-performance, nanotwinned materials.

Identification and Optimization of more Efficient Olivetolic Acid Synthases.

Introduction: Olivetolic acid (OLA) is a key intermediate in cannabidiol (CBD) synthesis, and cannabinoids are important neuroactive drugs. However, the catalytic activity of olivetolic acid synthase (OLS), the key enzyme involved in OLA biosynthesis, remains low and its catalytic mechanism is unclear. Materials and Methods: In this study, we conducted a scrupulous screening of the pivotal rate-limiting enzyme and analyzed its amino acid sites that are critical to enzyme activity as validated by experiments. Results: Through stringent enzyme screening, we pinpointed a highly active OLS sequence, OLS4. Then, we narrowed down three critical amino acid sites (I258, D198, E196) that significantly influence the OLS activity. Conclusions: Our findings laid the groundwork for the efficient biosynthesis of OLA, and thereby facilitate the biosynthesis of CBD.

Multiple Origins of Bioluminescence in Beetles and Evolution of Luciferase Function.

Bioluminescence in beetles has long fascinated biologists, with diverse applications in biotechnology. To date, however, our understanding of its evolutionary origin and functional variation mechanisms remains poor. To address these questions, we obtained high-quality reference genomes of luminous and nonluminous beetles in 6 Elateroidea families. We then reconstructed a robust phylogenetic relationship for all luminous families and related nonluminous families. Comparative genomic analyses and biochemical functional experiments suggested that gene evolution within Elateroidea played a crucial role in the origin of bioluminescence, with multiple parallel origins observed in the luminous beetle families. While most luciferase-like proteins exhibited a conserved nonluminous amino acid pattern (TLA346 to 348) in the luciferin-binding sites, luciferases in the different luminous beetle families showed divergent luminous patterns at these sites (TSA/CCA/CSA/LVA). Comparisons of the structural and enzymatic properties of ancestral, extant, and site-directed mutant luciferases further reinforced the important role of these sites in the trade-off between acyl-CoA synthetase and luciferase activities. Furthermore, the evolution of bioluminescent color demonstrated a tendency toward hypsochromic shifts and variations among the luminous families. Taken together, our results revealed multiple parallel origins of bioluminescence and functional divergence within the beetle bioluminescent system.

Congenital Cervical Scoliosis Treated with Concave Side Distraction with Three-Dimensional Printed Titanium Cage.

STUDY DESIGN: Single-center, retrospective study. OBJECTIVE: Hemivertebra resection is the only treatment option for congenital cervical scoliosis (CCS). However, this procedure is complex and technically demanding. It often requires a considerably long operation, and there is substantial intraoperative bleeding. Therefore, we have attempted to treat CCS with a concave side distraction comprising a three-dimensional (3D) printed titanium cage. The purpose of this study is to evaluate the safety and efficacy of this technique for the treatment of patients with CCS. METHODS: A series of 22 patients with CCS who underwent a concave side distraction technique between 2019 and 2021 were retrospectively reviewed and analyzed. Radiological measurements included the Cobb angle of the distraction segments, the kyphosis angle, the range of movement, and the distraction correction angle. Student's t-test and Spearman correlation analysis were used for statistical analysis. p < 0.05 was considered statistically significant. RESULTS: The study included 12 males and 10 females whose ages ranged from 6 to 14 years old (9.8 ± 2.1 years old). Follow-up times ranged from 15 to 30 months (25.8 ± 3.6 months). Among 22 patients, two patients developed a postoperative C5 nerve root palsy and recovered after being treated with conservative treatment for 6 months. The duration of surgery ranged from 229 to 756 min (389 ± 112 min), and the estimated volume of blood loss ranged from 100 to 600mL (235 ± 121 mL). The coronal Cobb angle (p < 0.001), kyphosis angle (p < 0.05), and range of movement (p < 0.001) between the last follow-up and preoperative period were significantly different. A total of 28 segments were distracted, and the Cobb angle of the distraction segment ranged from 2.4 to 14.1° (8.5 ± 3.0°). There were six upper cervical spines (8.9 ± 1.9°) and 22 lower cervical spines (8.4 ± 3.2°) with no significant difference between them (p = 0.130). In addition, there was no correlation between the angle of the concave side distraction and patients' age (r = 0.018, p = 0.315). The fusion was solid between the bone and the customized 3D-printed pore metal cage at the final follow-up. CONCLUSION: The concave side distraction comprising a customized 3D-printed titanium cage implantation can provide satisfactory correction results and is a safe and reliable procedure for treating CCS.

Cracking the code: Deciphering the role of the tumor microenvironment in osteosarcoma metastasis.

Osteosarcoma (OS) is the most common malignant bone tumor in children and adolescents. It is characterized by a rapid progression, poor prognosis, and early pulmonary metastasis. Over the past 30 years, approximately 85% of patients with osteosarcoma have experienced metastasis. The five-year survival of patients with lung metastasis during the early stages of treatment is less than 20%. The tumor microenvironment (TME) not only provides conditions for tumor cell growth but also releases a variety of substances that can promote the metastasis of tumor cells to other tissues and organs. Currently, there is limited research on the role of the TME in osteosarcoma metastasis. Therefore, to explore methods for regulating osteosarcoma metastasis, further investigations must be conducted from the perspective of the TME. This will help to identify new potential biomarkers for predicting osteosarcoma metastasis and assist in the discovery of new drugs that target regulatory mechanisms for clinical diagnosis and treatment. This paper reviews the research progress on the mechanism of osteosarcoma metastasis based on TME theory, which will provide guidance for the clinical treatment of osteosarcoma.

Two new species of Valleriola (Hemiptera: Heteroptera: Leptopodidae) and taxonomic notes on the tribe Leptopodini Brullé, 1836 from East and Southeast Asia.

Two species of the genus Valleriola Distant, 1904 (Heteroptera: Leptopodomorpha: Leptopodidae: Leptopodinae: Leptopodini) are described as new: Valleriola asiatica sp. nov. from Laos and Hainan Island of China, and Valleriola bui sp. nov. from Laos and Thailand. In addition, Leptopus riparius Hsiao, 1964 is newly recorded for Vietnam, Valleriola javanica Drake & Hottes, 1951 is newly recorded for Laos, and additional records are provided for Leptopus riparius, Valleriola javanica and Valleriola buenoi (Usinger, 1942). Photographs of the dorsal habitus, heads, hemelytra, fore femora, male parameres and live specimens are provided, accompanied by a distribution map for the species of Leptopodini occurring in East and Southeast Asia.

Complications and prognosis of primary thoracic and lumbar giant cell tumors treated by total tumor resection.

BACKGROUND: Spinal giant cell tumor (SGCT) is a relatively rare primary tumor. En bloc resection is the preferred surgical procedure for it due to its aggressiveness, meanwhile leading to more complications. We reported the characteristics of perioperative complications and local control of total tumor resection including en bloc resection and piecemeal resection for primary thoracic and lumbar spinal giant cell tumors in a single center over 10 years. METHODS: This is a retrospective cross-sectional and cohort study. Forty-one consecutive patients with SGCTs who underwent total tumor resection from 2010 to 2020 at our institution and were followed up for at least 24 months were reviewed. Surgery data, complication characteristics and local tumor control were collected and compared by different surgical procedure. RESULTS: Forty-one patients were included, consisting of 18 males and 23 females, with a mean age of 34.2 years. Thirty-one had thoracic vertebra lesions, and 10 had lumbar vertebra lesions. Thirty-five patients were primary cases, and 6 patients were recurrent cases. Eighteen patients were treated by total en bloc spondylectomy (TES), 12 patients underwent en bloc resection according to WBB surgical system, and 11 patients underwent piecemeal resection. The average surgical time was 498 min, and the mean estimated blood loss was 2145 ml. A total of 58 complications were recorded, and 30 patients (73.2%) had at least one perioperative complication. All patients were followed up after surgery for at least 2 years. A total of 6 cases had postoperative internal fixation failure, and 4 cases presented local tumor recurrence (9.8%). CONCLUSIONS: Although the surgical technique is difficult and accompanied by a high rate of perioperative complications, en bloc resection can achieve favorable local control in SGCT. When it is too difficult to complete en bloc resection, thoroughly piecemeal resection without residual is also acceptable, given the relatively low recurrence rate.

Implant Materials for Anterior Column Reconstruction of Cervical Spine Tumor.

The spine is the most common site of bone metastases. Many cancer patients will ultimately develop spinal metastatic disease with symptomatic epidural spinal cord compression. At present, the main treatment for cervical spine tumors is surgical resection combined with postoperative radiotherapy. Implant materials for cervical spine anterior column reconstruction need to meet amounts of different properties, such as biocompatibility, bioactivity and the ability to maintain long-term mechanical strength. The selection of different materials determines the surgical efficacy and prognosis of patients to a certain extent. This article provides an overview of a variety of implant materials used for anterior column reconstruction after cervical spine tumor resection, introduces and analyzes their properties, advantages, disadvantages, derivatives, and applications in clinical practice, and looks forward to the future development of implant materials.

Ultrastrong conductive in situ composite composed of nanodiamond incoherently embedded in disordered multilayer graphene.

Traditional ceramics or metals cannot simultaneously achieve ultrahigh strength and high electrical conductivity. The elemental carbon can form a variety of allotropes with entirely different physical properties, providing versatility for tuning mechanical and electrical properties in a wide range. Here, by precisely controlling the extent of transformation of amorphous carbon into diamond within a narrow temperature-pressure range, we synthesize an in situ composite consisting of ultrafine nanodiamond homogeneously dispersed in disordered multilayer graphene with incoherent interfaces, which demonstrates a Knoop hardness of up to ~53 GPa, a compressive strength of up to ~54 GPa and an electrical conductivity of 670-1,240 S m-1 at room temperature. With atomically resolving interface structures and molecular dynamics simulations, we reveal that amorphous carbon transforms into diamond through a nucleation process via a local rearrangement of carbon atoms and diffusion-driven growth, different from the transformation of graphite into diamond. The complex bonding between the diamond-like and graphite-like components greatly improves the mechanical properties of the composite. This superhard, ultrastrong, conductive elemental carbon composite has comprehensive properties that are superior to those of the known conductive ceramics and C/C composites. The intermediate hybridization state at the interfaces also provides insights into the amorphous-to-crystalline phase transition of carbon.

Prognostic Analysis of Spinal Metastasis Secondary to Lung Cancer after Surgeries: A Unicentric, Large-Cohort, Retrospective Study.

PURPOSE: Spinal metastases of lung cancer (SMLC) usually have high degree of malignancy and require surgical treatment. However, there are several controversies about the efficacy of surgery. This study aimed to investigate factors predicting prognosis of SMLC after surgery-based comprehensive treatment. METHODS: A cohort of 112 cases of SMLC who underwent surgical treatment between 2009 and 2020 were retrospectively reviewed and analyzed. The surgical strategies included total en-bloc spondylectomy, debulking surgery, palliative decompression, and vertebral augmentation procedures. The patients were regularly followed-up. Survival analysis was performed, as well as analysis of the patients' neurological recovery, pain relief, and improvement of Karnosky performance score (KPS). Cox regression was used to analyze influencing factors of survival time, and Kaplan-Meier method was performed in survival analysis. RESULTS: The cohort included 63 males and 49 females, with an average age of 60.6 ± 10.6 years. Median survival time was 16 months. A total of 86.7% of paralysis patients' neurological function recovered and 83.9% of patients with low KPS score (10-40) improved. Surgical method was significantly correlated with improvement of neurological function (p < 0.001) and KPS (p < 0.001). The mean bleeding volume was 502 ml and operative time was 170 min. The survival rates at 3, 6, 12, 24, and 36 months were 92.0%, 80.4%, 63.4%, 63.4%, and 22.6%, respectively. Postoperative Frankel grade (p < 0.001), postoperative KPS score (p = 0.001), and application of molecular targeted drugs (p < 0.001) were significantly correlated with survival time in univariate analysis, while application of molecular targeted drugs was an independent predictor for a longer survival by a multivariate analysis. CONCLUSION: Surgery-based comprehensive treatment brought a fair outcome, with elongated survival time. Surgery can significantly improve patients' neurological function and physical performance status. Adjuvant targeted therapy is an independent positive factor for patients' survival.

Notes on the genus Pseudovelia Hoberlandt, 1950 (Hemiptera: Heteroptera: Veliidae) with description of four new species from the East and Southeast Asian mainland.

Four species of the genus Pseudovelia Hoberlandt, 1950 from the East and Southeast Asian mainland are described as new: Pseudovelia curvisetae sp. nov. from Yunnan of China, P. shaanxiensis sp. nov. from Shaanxi of China, P. zhengi sp. nov. from Anhui of China and P. plauta sp. nov. from Malaysia. In addition, P. buccula Andersen, 1983 and P. takarai Miyamoto, 1964 are newly recorded from China. Photographs of the male and female dorsal habitus, male fore, middle, and hind legs, and male genitalic structures are provided, accompanied by line drawings of male genitalic structures and a distribution map.

Achieving the theoretical limit of strength in shell-based carbon nanolattices.

Recent developments in mechanical metamaterials exemplify a new paradigm shift called mechanomaterials, in which mechanical forces and designed geometries are proactively deployed to program material properties at multiple scales. Here, we designed shell-based micro-/nanolattices with I-WP (Schoen's I-graph-wrapped package) and Neovius minimal surface topologies. Following the designed topologies, polymeric microlattices were fabricated via projection microstereolithography or two-photon lithography, and pyrolytic carbon nanolattices were created through two-photon lithography and subsequent pyrolysis. The shell thickness of created lattice metamaterials varies over three orders of magnitude from a few hundred nanometers to a few hundred micrometers, covering a wider range of relative densities than most plate-based micro-/nanolattices. In situ compression tests showed that the measured modulus and strength of our shell-based micro-/nanolattices with I-WP topology are superior to those of the optimized plate-based lattices with cubic and octet plate unit cells and truss-based lattices. More strikingly, when the density is larger than 0.53 g cm-3, the strength of shell-based pyrolytic carbon nanolattices with I-WP topology was found to achieve its theoretical limit. In addition, our shell-based carbon nanolattices exhibited an ultrahigh strength of 3.52 GPa, an ultralarge fracture strain of 23%, and an ultrahigh specific strength of 4.42 GPa g-1 cm3, surpassing all previous micro-/nanolattices at comparable densities. These unprecedented properties can be attributed to the designed topologies inducing relatively uniform strain energy distributions and avoiding stress concentrations as well as the nanoscale feature size. Our study demonstrates a mechanomaterial route to design and synthesize micro-/nanoarchitected materials.

Scoliosis in dysplastic spondylolisthesis: a clinical survey of 50 young patients.

BACKGROUND: Dysplastic spondylolisthesis is a rare spinal deformity that occurs mainly in young patients. Although its sagittal parameters had been well stated, coronal abnormalities in these patients were poorly studied. The purposes of this study were: (1) to investigate the prevalence of scoliosis in dysplastic spondylolisthesis;(2) to assess scoliosis resolution or persistence after surgery; and (3) to propose a modified classification of scoliosis associated with dysplastic spondylolisthesis. METHODS: Fifty patients (average age 14.9 ± 5.6 years) diagnosed with dysplastic spondylolisthesis who underwent surgical treatment were followed up and their data were analyzed. Standing posteroanterior and lateral full spine radiographs were used to measure the coronal and sagittal parameters. Patients with scoliosis, which was defined as a coronal Cobb angle greater than 10°, were divided into three groups according to their curve characteristics: "independent" scoliosis (IS) group, spasm scoliosis (SS) group, and olisthetic scoliosis (OS) group. SS and OS were spondylolisthesis-induced scoliosis. The radiographic parameters and patient-reported outcomes were collected before and after surgery and compared between groups. RESULTS: The average slip percentage was 62.8% ± 23.1% and the average follow-up time was 51.5 ± 36.4 months (range 3-168 months). Twenty-eight of the 50 (56%) dysplastic spondylolisthesis patients showed scoliosis, of which 8 were IS (24.7° ± 15.2°), 11 were SS (13.9° ± 3.0°), and 9 were OS (12.9° ± 1.9°). By the last follow-up, no scoliosis resolution was observed in the IS group whereas all SS patients were relieved. Of the nine patients with OS, four (44.4%) had scoliosis resolution after surgery. CONCLUSION: Distinguishing different types of scoliosis in dysplastic spondylolisthesis patients may help surgeons to plan treatment and understand prognosis. For patients with significant scoliosis, whether "independent" or spondylolisthesis-induced, treatment of spondylolisthesis should be performed first and scoliosis should be observed for a period of time and treated according to the corresponding principles.

A sheep model of chronic cervical compressive myelopathy via an implantable wireless compression device.

PURPOSE: This study aimed to establish an animal model in which we can precisely displace the spinal cord and therefore mimic the chronic spinal compression of cervical spondylotic myelopathy. METHODS: In vivo intervertebral compression devices (IVCDs) connected with subcutaneous control modules (SCCMs) were implanted into the C2-3 intervertebral disk spaces of sheep and connected by Bluetooth to an in vitro control system. Sixteen sheep were divided into four groups: (Group A) control; (Group B) 10-week progressive compression, then held; (Group C) 20-week progressive compression, then held; and (Group D) 20-week progressive compression, then decompression. Electrophysiological analysis (latency and amplitude of the N1-P1-N2 wave in somatosensory evoked potentials, SEP), behavioral changes (Tarlov score), imaging test (encroachment ratio (ER) of intraspinal invasion determined by X-ray and CT scan), and histological examinations (hematoxylin and eosin, Nissl, and TUNEL staining) were performed to assess the efficacy of our model. RESULTS: Tarlov scores gradually decreased as compression increased with time and partially recovered after decompression. The Pearson correlation coefficient between ER and time was r = 0.993 (p < 0.001) in Group B at 10 weeks and Groups C and D at 20 weeks. And ER was negatively correlated with the Tarlov score (r = -0.878, p < 0.001). As compression progressed, the SEP latency was significantly extended (p < 0.001), and the amplitude significantly decreased (p < 0.001), while they were both partially restored after decompression. The number of abnormal motor neurons and TUNEL-positive cells increased significantly (p < 0.001) with compression. CONCLUSION: Our implantable and wireless intervertebral compression model demonstrated outstanding controllability and reproducibility in simulating chronic cervical spinal cord compression in animals.